At Monico, we integrate critical assets into control and monitoring systems and specialize in data acquisition, protocol conversion and remote monitoring communications. We are recognized worldwide for our expertise integrating high horsepower industrial engines and connected equipment into overall monitoring systems while providing superior communications products and technical assistance across the industrial marketplace.
Our application specialists have the right product and configuration for your specific needs. Our products are easy to install, as they come fully pre-configured, and offer capabilities such as real-time data logging, email alerts, virtual HMIs viewable from anywhere on a network and multiple input/output protocols.
Our goal is to provide solutions that allow our customers to maximize equipment availability, reduce unscheduled downtime and help prevent catastrophic failures.
CDL Gateway™The Monico CDL Gateway™ is a plug-and-play protocol converter / data concentrator product, which provides direct access to engine monitoring parameters from Caterpillar® industrial equipment via a variety of different protocols. It is used in applications where engine data needs to be accessed from a Programmable Logic Controller (PLC), Human-Machine Interface (HMI), SCADA System or some other remote monitoring device. No intermediate devices are needed and little or no setup is required. Benefits & Features: • Over 400 pre-configured registers • Built-in USB user interface shows all available parameters on a specific installation • 10 to 15 times faster than the previous customer communications products • Automatic engine detection and configuration • Din-rail mounted • Gathers data from other devices through available ports • Polls parameters at a rate of approximately 30 to 130 parameters per second • C-UL approved for Class I Div II Groups A-D hazardous locations • UL508 listed for industrial control panel use • Supports over a hundred different protocols • Capable of direct communications with Allen-Bradley, GE Fanuc, and Siemens PLC without intermediate devices Supports over 100 protocols including: • Allen Bradley • GE Fanuc • Siemens • OMRON • Modbus • Ethernet IP • BACnet • Honeywell Compatible Engine Controller: 3400, 3500, G3400, G3500, G3600, G3520, GCM34, ITSM, ICSM, EMCP II, EMCP II+, EMCP II+P, EIS/AFR, VIMS, C9, C15, C18, C27, C32, C175, C280
Custom Protocol Gateway™
Custom Protocol Gateway™The Monico Custom Protocol Gateway™ is an extremely flexible device with a total of four to six physical ports that can communicate in up to nine protocols simultaneously. It supports about 100 protocols total, with more being added on a regular basis. The Gateway can be used to collect information from a myriad of devices which use multiple protocols over multiple ports and put all the information in a common pre-configured data map. It can connect Allen-Bradley, GE Fanuc, Siemens, and Schneider PLC’s, as well as many other devices, into one functional network. Features: • Pre-configured data mapping of common data parameters • MonicoView ™ free software for field settings and setup adjustments • Plug-and-play operation • Supports multiple engine ECM’s • Din-rail mounted • Standard versions for Modbus RTU and Modbus TCP/IP slaves • Capable of direct communications with Allen-Bradley, GE Fanuc, Siemens, OMRON and Panasonic PLC’s without intermediate devices • 24 VDC power requirement Supports over 100 protocols including: Allen Bradley, GE Fanuc, Siemens, OMRON, Modbus, BACnet, CANopen, PROFIBUS, DEVICENET, Ethernet IP, Bristol Babcock BSAP, FlowCom, Garmin, Honeywell, IDEC, Mitsubishi Electric, Pason, PLC Direct Koyo, Schneider-Telemechanique, SquareD, Toshiba and Yokogawa
J1939 Gateway™The J1939 Gateway™ is a plug-and-play data concentrator and protocol converter. It comes pre-configured for your application, so all you have to do is install the unit and communicate. If customization is needed in the field, you can use our free software, MonicoView™, to change port settings, adjust mapping, add field devices, and incorporate other protocols. Features: • Pre-configured data mapping of common data parameters • MonicoView ™ free software for field settings and setup adjustments • Plug-and-play operation • Supports multiple engine ECM’s • Din-rail mounted • Standard versions for Modbus RTU and Modbus TCP/IP slaves • Capable of direct communications with Allen-Bradley, GE Fanuc, Siemens, OMRON and Panasonic PLC’s without intermediate devices • 24 VDC power requirement Supports over 100 protocols including: Allen Bradley, GE Fanuc, Siemens, OMRON, Modbus, BACnet, CANopen, PROFIBUS, DEVICENET, Ethernet IP, Bristol Babcock BSAP, FlowCom, Garmin, Honeywell, IDEC, Mitsubishi Electric, Pason, PLC Direct Koyo, Schneider-Telemechanique, SquareD, Toshiba and Yokogawa Compatible Engines & Controls: Detroit Diesel, Cat ® EMCP3, Perkins, Cummins, MTU, John Deere, Deutz-EMR and KOHLER
Programmable Remote Annunicator
The Programmable Remote Annunicator leverages the capabilities of the CDL Gateway™ and syncs those capabilities with an HMI to create an annunciator panel for Caterpillar® engines and gensets. The Annunciator can also be used with a J1939 Gateway™ or Custom Protocol Converter to provide advanced annunciation on any industrial engine. The Programmable Remote Annunciator is a 6 inch touch screen specifically programmed to annunciate general events on industrial engines and can be used over Ethernet or Serial networks. The standard product shows events for Common Warnings and Shutdowns. What makes this annunciator stand apart is the included HMI screen which can also be viewed remotely via a virtual HMI. The standard product also includes quick reference to basic engine and generator data. When an event occurs, the associated “General Warning” or “General Shutdown” LED will illuminate. The user can then view the specific faults leading up to the event. This coupled with the basic engine or generator data provides a powerful solution for quickly determining annunciator needs.Optional I/O Modules lend to the capability to annunciate any digital input signal and provide an annunciated digital output. In addition, custom programming can provide a powerful solution for specific customer needs.
m3™ ( Monico Mobile Messenger)
m3™ is designed for high volume applications requiring consistent data parameter protocol translation between CDL (CAT® Data Link) and/or J1939 and/or Modbus RTU. The unit is purpose built in an environmentally sealed enclosure and designed for industrial, mobile, marine and off-road applications. The semi-transparent housing provides clear visibility to LED indicating lights configured to provide positive confirmation of power, connectivity, and data transmit/data receive.
mCore™ SDR (Secure Data Router)
The mCore™ SDR (Secure Data Router) Gateway is purpose-built for Cyber Security and Computational Edge Data Analytics. An industrial translator and device gateway combined with a secure edge router and an on-board data analytics engine in one device. This industrially hardened package with customizable X.509 security certificates and hazardous location approvals paired with our new Pi Connector technology is Monico’s Next Generation platform for remote monitoring and telematics applications.
Boat Building / Repair
Boat Building Supplies
Computer / Software / Internet
Deck Machinery / Hardware / Equipment
Electrical Systems & Components
Electronics / Communications
Propulsion / Power