November 28 - 30, 2018

Honeywell Hermetic

Home   >   Exhibitor List   >   Honeywell Hermetic
4522 Center Street
Deer Park , TX 77536
United States
Booth #3047

Honeywell Hermetic

Honeywell Hermetic is a member of the Honeywell Marine Solutions group (HMS).  We are a leading supplier of level gauging and sampling equipment for the Oil and Petro-Chemical industry.
 
Honeywell Hermetic supports the below Marine Solutions portfolio:
• Enraf Marine Systems:  liquid level gauging & gas detection systems
• Enraf Tanksystem: Hermetic portable tank level gauging and sampling
• • BW Technologies: portable gas detection devices
 
 
Equipment, Training, and Service, it’s all under one roof at Honeywell Hermetic.  Come see why Honeywell Hermetic has become the number one supplier of gauging and sampling equipment for the Oil and Petro-Chemical industry.

Products & Services

Categories

HERMetic Deck Valve A-4 SS

HERMetic Deck Valve A-4 SSSpecially designed heavy-duty compact ball valve totally in stainless steel 316 and with Teflon gaskets. Valve with 4" full bore. Deck flange according to ANSI 150 lbs. 4" standard. Valve provided with swing away cover fitted with 1" quick-connect male coupling that takes all HERMetic gauges and accessories except the sampler. For this purpose cover can be swung open and housing of HERMetic Sampler A-4 or Sampler GT4 can be easily installed on top of the valve. Three swing nuts are used to secure cover or alternatively sampler chamber.

HERMetic Sampler GT4

HERMetic Sampler GT4Portable Sampler with approx. 2 liters sampling capacity The HERMetic Sampler GT4 is designed for closed gas tight sampling of liquids which present a Fire-, Health- or Airpollution Hazard. The sampler housing is mounted on top of the HERMetic 4" deck valve. The transfer of the liquid from the sampling bottle to a laboratory bottle occurs by opening the transfer valve at the bottom of the sampler.Advantages Easy installation on 4" vapour control valve The sampling height can be read on the graduated tape The sampling bottle can be easily removed by opening the top of the sampler housing The sampler is delivered with a zone sampling bottle. Spot and running bottles on request

HERMetic Sampler GTN Chem

HERMetic Sampler GTN ChemPortable gas tight Sampler with closed liquid transfer The  HERMetic Sampler GTN Chem is dedicated to applications where the sample has to be protected from any contact with the atmosphere during the whole lifetime of the sample. This new sampler has a closed vapour recovery system that repress the vapour back into the tank during the transfer of the liquid into the laboratory bottle. This new design allows all the advantages of the former HERMetic GT2 chem without use of a carbon filter for vapour recovery.  It is recommended for sampling of hygroscopic or oxygenating chemicals and guarantees the integrity of the sample.Advantages Easy installation on 2" vapour control valves with quick connect coupling The sampling height can be read from the graduated tape After sampling, the liquid can be transferred into a sealed laboratory bottle with septum by actuating the pump. Closed vapour recovery system that repress the vapour back into the tank during transfer of the liquid into the laboratory bottle No toxic emission during sampling No gas release during operation The unit can be purged with inert gas before and/or after sampling The sampler is delivered with a zone sampling bottle if not otherwise specified. Additional spot, bottom or running sampling bottles are available Installation on 2" HERMetic Compact Valves exclusivelyThe HERMetic Sampler GTN Chem is dedicated to applications where the sampler has to be protected from any contact with the atmosphere during the whole lifetime of the sample. The unit is also recommended for use in corrosive products.

HERMetic Sampler GTX Chem

HERMetic Sampler GTX ChemPortable gas tight Sampler for closed operation with liquid transfer The HERMetic Sampler GTX Chem is dedicated to applications where closed sampling is required and a sample of approx. 0,5 litre of liquid is needed. The transfer of the liquid from the sampling bottle to a laboratory bottle occurs by overpressuring the upper chamber of the sampler with a pump.AdvantagesEasy installation on 2" vapour control valves with quick connect coupling The sampling height can be read on the graduated tape After sampling, the liquid can be transferred into a laboratory bottle by opening the transfer valve and actuating the pressure pump The sampler is delivered with a zone sampling bottle if not otherwise specified. Additional spot, bottom or running sampling bottles are available Its very light construction facilitates its transport and handling Very easy to clean Low investment cost Fully compatible with non corrosive and corrosive liquids Special design for use on 2" HERMetic Compact Valves exclusively sampler dedicated to your application HERMetic Sampler GTX ChemWith special FFKM gaskets, recommended for operations in corrosive liquidsMaterials : Stainless Steel AISI 316, PTFE, PVDF, FFKM

HERMetic UTImeter Gtex

HERMetic UTImeter GtexThe HERMetic UTImeter Gtex is a portable gas tight liquid level gauge designed for closed gauging of hydrocarbons and chemicals. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature probe is a RTD element. The characteristics of the RTD are stored inside the sensor. The sensor is sending true temperature values to the electronic box. Therefore changing a sensor or a tape does not require a new calibration. The unit is used for custody transfer, inventory control measurement and free water detection on marine vessels and shore tanks. Connected to a HERMetic vapour control valve fixed on the tank, the HERMetic UTImeter Gtex avoids any gas release during operation.The unit enables 3, optionally 4 measurements in one single operation:- Ullage- Temperature- Oil-Water interface level- Innage, Reference height (Visc version)AdvantagesContinuous temperature reading, ullage and interface detection.Easy access for battery exchange.High accuracy and stability. Chemically resistant to corrosive liquids.Sensor exchange without needs of new calibration. No temperature drift. No degradation of the sensitivity due to sensor ageing.Interchangeable adaptors for connection on different vapour control valves.Tape cleaning devices, window wiper and tape protection on all units as standard.Low maintenance cost:Fully modular unit. Change tape, storage tube, sensor or instrument unit yourself. Easy and detailed instructions in Operation and Service Manual.

HERMetic UTImeter Rtex

HERMetic UTImeter RtexThe HERMetic UTImeter Rtex is a portable liquid level gauge designed for restricted gauging of petroleum products. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature probe is a RTD element. The characteristics of the RTD are stored inside the sensor. The sensor is sending true temperature values to the electronic box. Therefore  changing a sensor or a tape does not require a new calibration. The unit is used for custody transfer, inventory control measurement and free water detection on marine vessels and shore tanks. The HERMetic UTImeter Rtex has to be connected to a HERMetic vapour control valve fixed on the tank.The unit enables 3, optionally 4 measurements in one single operation:- Ullage- Temperature- Oil-Water interface level- Innage, Reference height (Visc version)Advantages:Continuous temperature reading, ullage and interface detection.Easy access for battery exchange.High accuracy and stability.Sensor exchange without needs of new calibration. No temperature drift. No degradation of the sensitivity due to sensor ageing.Interchangeable adaptors for connection on different vapour control valves.Tape cleaning devices, window wiper and tape protection on all units as standard.Low maintenance cost:Fully modular unit. Change tape, storage tube, sensor or instrument unit yourself. Easy and detailed instructions in Operation and Service Manual.

HERMetic valves

HERMetic valvesHERMetic Vapour Control Valves for gauging and sampling HERMetic Compact valves are specially designed to support all portable HERMetic equipment with HERMetic quick connector and represent the base for the zero-ullage reference when installed at the appropriate height. They ensure a safe and reliable operation of all portable HERMetic units certified for use in classified areas.They are available in three different size 1", 2" and 4". Depending on the equipment fitted on the valves. The top part of the valve is designed to support all HERMetic gauging and sampling equipment with 1", 2" or 4" connection.

Boat Building / Repair

  • Automation

Boat Building Supplies

  • Gauges
  • Monitoring Systems
  • Tank Gauging & Alarm Systems
  • Valves & Fittings
© Diversified Communications. All rights reserved.