November 28 - 30, 2018

Fit Up Gear / Romar MEC

Home   >   Exhibitor List   >   Fit Up Gear / Romar MEC
218 W Richey Road
Houston , TX 77090
United States
Booth #1101

Fit Up Gear / Romar MEC

Romar / MEC most notably known as Fit up Gear. Leading innovators of fitting tools that aid in the fabrication of storage tanks, ships, barges, rigs as well as many other applications. All of our products are designed to lower your costs and make fabrication easier and faster.

Products & Services

Categories

Padeyes

Available for the first time: one-time use, weldable forged lifting padeyes that are engineered and certified to meet all BTH-1 classes and divisions. In stock, ready to ship. Available in 6 sizes from 1/2 ton to 6-1/2 ton capacities.

Screw Clamps

A Screw Clamp replaces temporary weld-on attachments such as padeyes and eliminates scars and burrs. Suitable for use in fitting and positioning bulkheads, frames, and more in shipbuilding applications. Used in conjunction with ratchets, come-alongs, and turnbuckles. Available in many styles and capacities.

Stif-Jak

Magnetically held press with all aluminum construction for downward pressure on stiffeners in shipbuilding. Uses 2 Maglogix switchable magnets with over 3,000 lbs breakaway strength each and a maintenance-free mechanical tensioning system. The patented Stif-Jak will afford you time savings of up to 95%.

Mag-Pry

The updated patented Mag-Pry is a strong, easy to use magnetic pry bar for material leveling and alignment also known as mismatch or high/low. Eliminates the need for welded tabs. Easy on/off actuation of the Maglogix MX-750 magnet provides high breakaway forces on thin plate materials.

Bulkhead Brace

A non-weld on Bulkhead brace to hold panels, walls bulkheads, etc...in place safely and scar free. Available with or without turnbuckle threads for fitting. Uses clamps or magnets

Bigfoot Material Leveler

Used for material leveling and alignment also known as mismatch or high/low. The Bigfoot is built to maximize point loading of the magnets and create equal loads on each end with single knob control. Numerous designs tested to failure before final design was consistently achieving 2,500 lbs. of force. Can also be used with impact tools.Features:• 2 XBAM-L-1000​​​​​​​ 1,100 lb magnets• Pivoting assembly centers load for maximum press• Effortless and ergonomic lever activation of magnet• TiN coated, hardened steel magnetic surface

PathFinder

A Har-Bach inc. product:It's finally here, 3 beams is the charm, plug and play seam tracking that really works. Optical seam tracking systems for automated welding systems.

MEC Saw

Coming soon....a magnetic mounted cold saw to cut temporary attachments off flush with the plate. Reduce the need for excsesive grinding and hot work.

Vacuum Boxes

Used for leak testing in building of ships, barges, tanks, or any seal weld application. Multiple designs for use in flat areas, corners, curves and +/- 90° joints. Double-sided gasket design ensures a good seal during vacuum test. Vacuum pump​ or compressed air source can be used.

Boat Building / Repair

  • Welding
  • Robotic Welding

Boat Building Supplies

  • Lighting
  • Fabrication Equipment
  • Metal Fab Equipment

Catalog / Retail

  • Distributors

Deck Machinery / Hardware / Equipment

  • Tools
© Diversified Communications. All rights reserved.