December 4 - 6, 2019 | New Orleans, LA

Fit Up Gear / Har-Bach Marketing

Home   >   Exhibitor List   >   Fit Up Gear / Har-Bach Marketing
218 W Richey Road
Houston , TX 77090
United States
Booth #1217

Fit Up Gear / Har-Bach Marketing

With over 100 years of combined industry experience, Fit Up Gear® has become a leading innovator of fitting and alignment tools that accelerate the fabrication of ships, barges, rigs and many other applications from military submarines and aircraft carriers to space flight vehicles and storage tanks. All our products are designed to lower your costs and make fabrication quicker and easier such as our No-Mar® magnetic fitting tools that are up to 100 times faster than traditional tools without scarring. We also offer clamps, safety items, LED lighting, water jet cutting, and CNC milling capabilities and are constantly improving our products and services with the latest technology to assist your manufacturing process.

Products & Services

Categories

Padeyes

Available for the first time: one-time use, weldable forged lifting padeyes that are engineered and certified to meet all BTH-1 classes and divisions. In stock, ready to ship. Available in 6 sizes from 1/2 ton to 6-1/2 ton capacities.

Screw Clamps

A Screw Clamp replaces temporary weld-on attachments such as padeyes and eliminates scars and burrs. Suitable for use in fitting and positioning bulkheads, frames, and more in shipbuilding applications. Used in conjunction with ratchets, come-alongs, and turnbuckles. Available in many styles and capacities.

Stif-Jak

Magnetically held press with all aluminum construction for downward pressure on stiffeners in shipbuilding. Uses 2 Maglogix switchable magnets with over 3,000 lbs breakaway strength each and a maintenance-free mechanical tensioning system. The patented Stif-Jak will afford you time savings of up to 95%.

Mag-Pry

The updated patented Mag-Pry is a strong, easy to use magnetic pry bar for material leveling and alignment also known as mismatch or high/low. Eliminates the need for welded tabs. Easy on/off actuation of the Maglogix MX-750 magnet provides high breakaway forces on thin plate materials.

Bulkhead Brace Clamp

Used to hold up bulkheads, walls and other structures during construction. Using any combination of 3 optional end mounts, you can easily hold, spin Brace Bar to adjust in place, then weld or use other permanent method to secure workpiece before removing Bulkhead Brace Clamp. Not to be used for lifting.PART: BB-84 (Standard 84” Brace Bar with 2 Yoke Ends and 2 Jam Nuts - Brace Bar lengths up to 10’ available)Optional End MountsPART: TRex-38 (Clamp for 3”-8” wide Ts)PART: FUGX-H-1-BN (Magnet)PART: PMB-BN-1-1 Pacman Clamp

Bigfoot Material Leveler

Used for material leveling and alignment also known as mismatch or high/low. The Bigfoot is built to maximize point loading of the magnets and create equal loads on each end with single knob control. Numerous designs tested to failure before final design was consistently achieving 2,500 lbs. of force. Can also be used with impact tools.Features:• 2 XBAM-L-1000​​​​​​​ 1,100 lb magnets• Pivoting assembly centers load for maximum press• Effortless and ergonomic lever activation of magnet• TiN coated, hardened steel magnetic surface

PathFinder

A Har-Bach Marketing, Inc. product, the Pathfinder in-process optical seam tracking with TH6x paves the way towards a perfect welding seam. Components and seams are recorded using a combination of laser lines and optical cameras, allowing the course of the welding seam to be corrected in real-time no matter the height or material. TH6i, with its added grayscale camera, can also track zero gap seams up to 0.02mm in width.A light pattern comprising three parallel laser lines is projected onto the component surface according to the principle of laser triangulation. At the same time, the seam shape at the joint is scanned by a digital camera. The laser lines are interrupted at the joint due to the inclined projection of approximately 20° and thus mark the seam point on the joint line.

MEC Saw

Coming soon....a magnetic mounted cold saw to cut temporary attachments off flush with the plate. Reduce the need for excsesive grinding and hot work.

Vacuum Boxes

Used for leak testing in building of ships, barges, tanks, or any seal weld application. Multiple designs for use in flat areas, corners, curves and +/- 90° joints. Double-sided gasket design ensures a good seal during vacuum test. Vacuum pumps available​ or compressed air source can be used.

Boat Building / Repair

  • Robotic Welding
  • Welding

Boat Building Supplies

  • Fabrication Equipment
  • Lighting
  • Metal Fab Equipment
  • Structural Fab Equipment

Catalog / Retail

  • Distributors

Deck Machinery / Hardware / Equipment

  • Tools
© Diversified Communications. All rights reserved.