Romar / MEC most notably known as Fit up Gear. Leading innovators of fitting tools that aid in the fabrication of storage tanks, ships, barges, rigs as well as many other applications. All of our products are designed to lower your costs and make fabrication easier and faster.
This new non-welded fitting aid assists in the make-up and gapping of vertical seams, deck seams, knuckles, and other plate joints that typically require the use of dogs, wedges, fishtail jacks, or other weld-on fitting aids. Also useful in fitting and aligning pipe.
Available for the first time: one-time use, weldable forged lifting padeyes that are engineered and certified to meet all BTH-1 classes and divisions. In stock, ready to ship. Available in 6 sizes from 1/2 ton to 6-1/2 ton capacities.
A Screw Clamp replaces temporary weld-on attachments such as padeyes and eliminates scars and burrs. Suitable for use in fitting and positioning bulkheads, frames, and more in shipbuilding applications. Used in conjunction with ratchets, come-alongs, and turnbuckles. Available in many styles and capacities.
A) The heavy-duty Ratchet Puller is used for adjusting the interval of frames, stiffeners, T-sections, and other steel structures without scars or burrs.
B) The heavy-duty Ratchet Puller is used for pulling or fixing blocks, bulkheads, and many other steel structures without scarring or burrs. Available in 1.5 to 3 ton models in various lengths.
The heavy-duty Ratchet Press is a convenient alternative to a jig or welded-on saddle when attaching L and T-section steel to outer plating, inner bottom, and decks of ships. Available in several heights and easily modified to fit your application.
New design and hydraulic system. Magnetically held hydraulic press to apply downward pressure on stiffeners in shipbuilding. Constructed entirely of aluminum and uses 2 Maglogix switchable magnets with over 3,000 lbs breakaway strength each. The patented Stif-Jak will afford you time savings of up to 95%.
The updated patented Mag-Pry is a strong, easy to use magnetic pry bar for material leveling and alignment also known as mismatch or high/low. Eliminates the need for welded tabs. Easy on/off actuation of the Maglogix MX-750 magnet provides high breakaway forces on thin plate materials.
Fast and easy way to secure steel sheets for fillet welds and fabrication. Easy on/off actuation of magnets. Available in 6”x8” and 10”x12” sizes with 2 magnet options.
This magnetic attachment secures the foot of your ladder to the deck or floor of any ferrous structure. Eliminates scars from welded-on stops. Each Ladder Sentry will accommodate the safety foot of a 1A or 1AA ladder. Each magnet supports 220 lbs. Sold in sets providing 440 lbs total support.
FUGL heavy-lifter switchable magnets with lifting capacities from 220 lbs to 4,400 lbs and breakaway strengths from 770 lbs to 15,400 lbs.
Also available: Maglogix lifting magnets with ergonomic lever activation. Outstanding performance on thin walled materials. 70% less weight than standard lifting magnets. Available in 550 lbs and 1,100 lbs lifting capacities.
Boat Building / Repair
Deck Machinery / Hardware / Equipment
Boat Building Supplies